53913 Swisttal, Peterstr. 70
auction status: abgeschlossen
auction status: abgeschlossen
Übersicht:
In order of the entitled parties we are selling online against highest bid a well maintained Plastic recycling plant for the production of PP-Regranulate with presortet Polypropylen-Fractions (PP 324/PP 323-3):
- Plant engineering, steel construction, conveyer technology, ballistic separator SUTCO
- METSO-Pre-shredder M+J
- Magnetic separator STEINERT
- Automatic sorting system TOMRA with scanner unit AUTOSORT SPEEDAIR
- Secondary shredder LINDNER KOMET 2200 HP
- Steel accessibility constructions, presorting system
- Washing and processing line OSWALD METZEN/REANTEC with Mechanical dry cleaners Reantec, Srew conveyors, Washing/separation tank
- Process water treatment plant PP-RECYCLING IWAT
- Extrusion processing unit EREMA
- Refrigeration/cooling water system ONI
- Flex silo landscape A.B.S., 3 silos with mobile loading screws
- Wheel loader CATERPILLAR, Electric forklift TOYOTA
If two or more high bids of the same amount are submitted in the same round, than the bid that was submitted first will be consider the standing high bid. Only the german sales and auctions conditions of the IndustrieWert GmbH are binding. Sale against highest bid as is, ex site, subject to prior sale.
Verkaufs- und Versteigerungsbedingungen
Angebot:
Seiten: 1
bestehend aus den in der beigefügten Anlage aufgelisteten Einzelkomponenten
Position steht nicht mehr zu Verfügung.
consisting of positions 2-16
Auktion abgeschlossen.
As a bale feed conveyor including filler wall for simultaneous feeding of up to 10 bales, total length approx. 20 m including incline
Auktion abgeschlossen.
Version with 7 blades, low-speed, capacity up to 2–4 tonnes per hour (various PP materials), grain size = 300 mm, cutting table, size 3,048 x 2,040 mm, cutting area 1,552 x 1,600 mm, with rotating blades, 2 shafts each with 7 rotating blades, chassis and conveyor belt, drive unit, with electric motors, hydraulic system, oil coolers, SIEMENS S7 PLC controller, 4-sided hopper
Auktion abgeschlossen.
Total length approx. 12,700 mm, ascending, on steel construction, with geared electric motor
Auktion abgeschlossen.
Total length approx. 14,300 mm, ascending, belt width 1,200 mm, sectional steel construction, with geared electric motor
Auktion abgeschlossen.
Total length approx. 4,600 mm, ascending, sectional steel construction, with geared electric motor
Auktion abgeschlossen.
Total length approx. 21,000 mm, ascending, frequency converter, with geared electric motor, sectional steel construction
Auktion abgeschlossen.
Total length approx. 8,030 mm, effective length 7,130 mm, 12 paddles 340 mm each, power 2 x 5.5 kW, total paddle length 6,200 mm
Auktion abgeschlossen.
Sectional steel construction, galvanized
Auktion abgeschlossen.
Total length approx. 6,500 mm, straight, belt width 2,000 mm, with geared electric motor
Auktion abgeschlossen.
Total length approx. 25,000 mm, variably ascending, belt width 800 mm, with geared electric motor, sectional steel construction, arched belt
Auktion abgeschlossen.
Total length approx. 5,000 mm, straight, with geared electric motor, sectional steel construction, belt width 800 mm
Auktion abgeschlossen.
Total length approx. 18,000 mm, ascending, variable speed, belt width 2,900 mm, with geared electric motor, sectional steel construction
Auktion abgeschlossen.
System width 2,800 mm, NIR sensor unit, Sharp Eye technology, valve block type 200/25, positioning system, automatic material jam detector, with rotating separating top, module for air support when sorting light materials and for sorting at increased belt speed, valve system type 200/25
Auktion abgeschlossen.
Total length approx. 5,500 mm, belt width 1,000 mm, with geared electric motor, sectional steel construction, with mechanical shifting
Auktion abgeschlossen.
System width 2,800 mm, air support, accelerator belt, length 6,000 mm, separation chamber with rotating separating top, control cabinet for AUTOSORT SPEEDAIR NIR SENSORS, with acceleration belt, separation chambers, with rotating separating top, module for air support when sorting light materials and for sorting at increased belt speed, valve system type 200/25
Auktion abgeschlossen.
Total length approx. 5,500 mm, belt width 1,000 mm, with geared electric motor, sectional steel construction, straight, with mechanical shifting
Auktion abgeschlossen.
Total length approx. 15,000 mm, belt width 1,800 mm, ascending, with geared electric motor, sectional steel construction
Auktion abgeschlossen.
System width 2,800 mm, air support, accelerator belt, length 6,000 mm, separation chamber with rotating separating top, control cabinet for AUTOSORT SPEEDAIR NIR SENSORS, with acceleration belt, separation chambers, with rotating separating top, module for air support when sorting light materials and for sorting at increased belt speed, valve system type 200/25
Auktion abgeschlossen.
System width 2,800 mm, NIR sensor unit, Sharp Eye technology, valve block type 200/25, positioning system, automatic material jam detector, with rotating separating top, module for air support when sorting light materials and for sorting at increased belt speed, valve system type 200/25
Auktion abgeschlossen.
Stairway and grating constructions with railings, ladders or stairs, to access the system
Auktion abgeschlossen.
consisting of positions 26-29, Including feed hopper, control cabinet, hydraulic unit, 2 x 200 kW, 400 V, 50 Hz, with LINDNER FPS control system
Auktion abgeschlossen.
= 30 mm, total length approx. 10,000 mm, belt width 1,400 mm, ascending, with geared electric motor, sectional steel construction, transversely stable belt, bend area with low-pressure rollers
Auktion abgeschlossen.
= 30 mm, total length approx. 18,500 mm, belt width 1,000 mm, ascending, with geared electric motor, sectional steel construction
Auktion abgeschlossen.
Including mixing silo in finishing section, consisting of positions 31-53
Auktion abgeschlossen.
With double discharge screw conveyor, hopper volume approx. 20 cbm, sectional steel frame, galvanised, fill level sensor
Auktion abgeschlossen.
Length approx. 7 m, screw dimensions approx. 500 x 7000 mm, ascending, sectional steel frame, galvanised
Auktion abgeschlossen.
With radial fan / rotary valve, manufactured by REITZ, type RGE 75/500-V-00 (serial no. 393389), order no. RMFT75/500V, up to 75 m³/minute, shaft power 10 kW, up to 2900 rpm, belt control unit, integrated collecting screws for dirt removal, mounted on steel frame, on vibration dampers
Auktion abgeschlossen.
With radial fan / rotary valve, manufactured by REITZ, type RGE 75/500-V-00 (serial no. 393388), order no. RMFT75/500V, up to 75 m³/minute, shaft power 10 kW, up to 2900 rpm, belt control unit, integrated collecting screws for dirt removal, mounted on steel frame, on vibration dampers
Auktion abgeschlossen.
Rotor diameter 600 mm, working width 1500 mm, motorised cutting blades, 7 rows with 2 cutting blades each, sectional steel support frame, with platform, control cabinet, separate control, currently defective / under repair
Auktion abgeschlossen.
For pre-cleaning the grinding stock, drive power 45 kW, housing length 3000 mm
Auktion abgeschlossen.
L/W/H 5 x 3 x 3.5 m, stainless steel / sectional steel construction, with 7 paddle drums, electric motor drive, chain scraper conveyor, maintenance and inspection platform, with walkway
Auktion abgeschlossen.
Order no. 21050532, drive 30 kW
Auktion abgeschlossen.
Intake temperature 100 degrees, volume flow 110 m³/minute, total pressure increase up to 1,120 dPa, shaft power up to 32.5 kW, up to 2,920 rpm, washing temperature up to 180°C
Auktion abgeschlossen.
L/W/H 4300 x 2300 x 5400 m, hopper capacity approx. 20 cbm, fill level monitoring
Auktion abgeschlossen.
Including platform, spare parts, water tanks, consisting of double pumping station, sand separator, up to 50 cbm/hour, internally fed model 100/200 drum screen, dewatering press type HD 290, collection tank, submersible pump/defoamer, storage tank, 15 cbm, plastic, electric agitator, flotation system type CCF35.000, up to 35 cbm/h, with 2 flotation tanks, clearing and lifting device, dosing pumps for chemical station, IWAT automatic polymer preparation station, type 500-R, volume 500 litres, process water tank, 15 cbm, double pumping station/pumping station sludge treatment, with agitator, IWAT screw press, type SP-HF06XLG (sludge dewatering), up to 7 cbm/h, pressing capacity up to 200 kg, drive power 4 kW
Auktion abgeschlossen.
consisting of positions 58-65
Auktion abgeschlossen.
Including dust and sound protection tunnel, frequency converter
Auktion abgeschlossen.
Including Polyscan and replacement package (new price €85,000), order no. P-20210225, with melt filter zone 1, touch panel, control cabinets, pellet separator, throughput scale, swivelling side panel for PCU cover, PUS operating equipment monitoring, IREMA Airflush technology, TROX suction device, automatic feed slide, extruder vacuum pump, CAM camera system, SAS 2500 suction system, process water tank, EREMA laser filter, hot die face pelletising system, pellet dewatering screen
Auktion abgeschlossen.
Up to 5 m, with pellet scale PSC 3000, with filling, up to 15 kg, pellet separator, PBB TWIN ST bagging station
Auktion abgeschlossen.
Made of polyester fabric, 3-part, consisting of Flex Silo type 1/36/74, volume 65 m³, external dimensions 3600 x 3600 mm, silo height 7400 mm, steel frame, frame height 8800 mm, level indicator full/empty, 3 pcs, conveyor system, approx. 25 m long, conveying capacity up to 3.5 t/h, with blower, 20 kW, rotary valve, pipe system, pipe diverter
Auktion abgeschlossen.
Mobile, diameter 220 mm, electric motor drive, 7.5 kW, height adjustable up to 45 degrees, point control, touch panel
Auktion abgeschlossen.
Mobile, diameter 220 mm, electric motor drive, 7.5 kW, height adjustable up to 45 degrees, point control, touch panel
Auktion abgeschlossen.
VIN: ZAT00908KHZ800282, permissible total weight 7,400 kg, permissible front axle load 3,550 kg, permissible rear axle load 4,700 kg, permit number K608, LSS hydraulic grab bucket, power 55.4 kW, operating hours approx. 2,538 h, full cabin, digital control, computer
Auktion abgeschlossen.
4-wheel, KAUP attachment, type 3.5T 45682, lift up to 4,700 mm, load capacity 3 tonnes, hydraulic fork adjustment, full cabin, lift motor meter readings approx. 225 h, travel motor approx. 700 h, key switch approx. 4,160 h
Auktion abgeschlossen.
Each 2-door, with stock of machine accessories, spare parts, tools
Auktion abgeschlossen.
Building-related extension of the dry sprinkler system in hall 9A, conveyor technology connection, electrical installations
Auktion abgeschlossen.
Seiten: 1